page: 37
Language: English
Size: 587.3 KB
Format: PDF
When the ignition switch is turned to ST position, the pull-in winding of the starter powers on, and then the starting gear of stater motor is pushed to and engaged with the gear of flywheel. At the same time, when the gears engage, the contact on the pull-in winding works and connects the power supply from the battery to the starter motor so as to turn the motor and start up the engine. When the ignition key returns back to the IG position, the holding coil of the starter powers off, and under the action of spring force of the gear the motor disengages from the flywheel and the flywheel of starter motor disconnects at the same time. The starting signal is transmitted to BCM at the same time. The BCM utilizes the starting signal to determine that the system is in the starting condition. In this case, the BCM will stop the action of motor of window glass regulator so as to ensure that there is electric engergy enough to be supplied to starter motor.
Visit us for more manuals at: http://www.dhtauto.com/forum.php
Like us on Facebook: https://www.facebook.com/Automotivelibrary
Thanks for reading!
Không có nhận xét nào:
Đăng nhận xét